ASME Section VIII-DIV-2-2010

   Device Manager is based on business objectives, through a series of technical, economic, organizational measures, the whole process of equipment and scientific management,2010 ASME Boiler and Pressure Vessel Code, Section VIII, Division 2: Alternative Rules American Society of Mechanical Engineers / 01-Jul-2010 / 1010 pages These rules provide an alternative to the minimum requirements for pressure vessels under Division 1 rules. In ASME Section VIII-DIV-2-2010 comparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensify values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. These rules may also apply to human occupancy pressure vessels typically in the diving industry.

Summary of ChangesAdded Annex 4.D to Part 4 . Guidance to Accommodate Loadings Produced by Deflagration.Revised Part 4, Para. 4.18 to make ASME Section VIII-DIV-2-2010 Tubesheet Rules consistent with Part UHX of VIII-1.Revised Part 2, Annexes 2.A and 2.B to include additional organizations with reciprocity agreements with recognized organizations.Added Para. 7.3.6 to Part 7 - Qualification of Nondestructive Examination Personnel.Added PWHT rqmts for P-No 10C Group 1 materials into Table 6.15 of Part6.Revised Table 6.11.A to change P-No. 5B Group 2 to P-No. 15E Group 1

 that the implementation of the planning from the device until the end of life of the whole process from the management. This process can be divided into pre-term management and use of management of two stages.

ASME B16.21-2011

Establish equipment management information system, using advanced computer and information technology, the use of modern equipment management principles and methods, often in business equipment to ensure good technical condition
.ASME B16.21-2011 Nonmetallic Flat Gaskets for Pipe Flanges American Society of Mechanical Engineers / 23-Feb-2011 / 26 pages ScopeThis Standard covers types, sizes, materials, dimensions,tolerances, and markings for nonmetallic flat gaskets.These ASME B16.21-2011 gaskets are dimensionally suitable for use with flanges described in the referenced flange standards.
 Full potential of existing equipment, improve its service efficiency and economy, to improve equipment management.
 that the implementation of the planning from the device until the end of life of the whole process from the management. This process can be divided into pre-term management and use of management of two stages.

API SPEC 19G2 -2010

 Equipment management with information sources and more types of broad, complex processing and statistical characteristics of a large quantity. With modern production methods change, the traditional management model as the original slow processing speed, the old approach, the accuracy, reliability and economy are greatly affected

Petroleum and API SPEC 19G2 -2010 natural gas industries-Drilling and production equipment, Part 2-Flow-control devices for side-pocket mandrels, First Edition (ISO 17078-2:2007 Modification) Edition: 1st
American Petroleum Institute / 01-Jun-2010 / 146 pages Scope
API Specification 19G2 provides requirements for subsurface flow-control devices used in side-pocket mandrels (hereafter called flow-control devices) intended for use in the worldwide petroleum and natural gas industry. This includes requirements for specifying, selecting, designing, manufacturing, quality-control, testing and preparation for shipping of flow-control devices. Additionally, it includes information regarding performance testing and
calibration procedures.
The installation and retrieval of flow-control devices is outside the scope of this part of ISO 17078. Additionally,this part of ISO 17078 is not applicable to flow-control devices used in centre-set mandrels or with tubingretrievable applications.
This document does not include requirements for API SPEC 19G2 -2010 side-pocket mandrels, running, pulling, and kick-over tools, and latches that might or might not be covered in other ISO specifications. Reconditioning of used flowcontrol devices is outside of the scope of this part of ISO 17078.

 .Making it difficult to adapt to the needs of modern management. Establish equipment management information system, using advanced computer and information technology,

API SPEC Q1-2010

This paper describes a device management and trends, analysis of the current status of device management. Actively explore the computer-aided facilities management model, the scientific concept of development, through the promotion and application of information management, device management of information technology to promote sustainable development, improve efficiency and create efficiency, improve the management level.
API SPEC Q1-2010 Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry, Eighth Edition, Includes API SPEC Q1-2010 Addendum 1 (2010) Edition: 8th
American Petroleum Institute / 01-Dec-2010 / 12 pages
With the development of science and technology. Business-to-device management of a higher demand. Equipment is a major enterprise for production material and technical base, has its own operating rules. Facilities management as an important part of enterprise management, enterprise management subsystem plays the other to promote, protect and restrict the role, affecting the production and business activities. Equipment management with information sources and more types of broad, complex processing and statistical characteristics of a large quantity.

ISO 6814-2009

Spare parts supplier managed inventory, spare parts warehouse inventory using suppliers that can give full play to
Supplier to the professional advantages of spare parts and maintenance and electrical testing, significant savings in corporate spare parts inventory, maintenance and periodic inspection fees will also avoid many of the spare reserves caused by the aging time is too long or technical eliminated.
ISO 6814:2009 Machinery for forestry — Mobile and selfpropelled machinery — Terms, definitions and classificationInternational Organization for Standardization / 05-May-2009 / 12pages Keywords: ISO 6814Scope  Both the definitions and the classification have been determined according to the end use of the machines as intended by the manufacturer. The terms and definitions do not cover all possible forestry and related operations or machinery,nor do they describe specific machines, but are given as an aid to nomenclature. This International Standard is applicable to machines designed for use in forestry for site preparation, planting,harvesting, processing, and the transport of wood and wood fibre. It is not applicable to machines designed to be used exclusively in sawmills or wood yards, to on-highway transport vehicles, or to aerial vehicles.
Spare parts is more real-time network management, dynamic, accurately reflect the inventory, improve the efficiency of spare call.

ASTM A29/A29M - 05

 VMI (Vendor Managed Inventory, VMI) as a new inventory management, inventory management has changed the traditional concept and business model, it is a systematic, integrated thinking for inventory management, supply chain organization to allow the organization of the downstream inventory policy, strategic planning and order management. Based on this idea, the power companies can manage suppliers of spare parts inventory as their virtual inventory, specific methods of operation, materials management and enterprise according to production sectors

A Summary of Changes section appears at the end of this standard.Footnote 2 - For ASME Boiler and Pressure Vessel Code applications see related Specification SA-29/SA-29M in Section II of that Code.

ASTM A29/A29M - 05 Revision / Edition: 05      Chg:      Date: 05/01/05STANDARD SPECIFICATION FOR STEEL BARS, CARBON AND ALLOY, HOT-WROUGHT, GENERAL REQUIREMENTS FORDocument Abstract(Footnote *)This specification(Footnote 2) covers a group of common requirements which, unless otherwise specified in the purchase order or in an individual specification, shall apply to carbon and alloy steel bars under each of the following ASTM specifications (or under any other ASTM specification which invokes this specification or portions thereof):In case of any conflict in requirements, the requirements of the purchase order, the individual material specification, and this general specification shall prevail in the sequence named.The values stated in inch-pound units or SI units are to be regarded as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.For purposes of determining conformance to this specification and the various material specifications referenced in 1.1, dimensional values shall be rounded to the nearest unit in the right-hand place of figures used in expressing the limiting values in accordance with the rounding method of Practice E 29.NOTE 1 - Specification A 29 previously listed dimensional tolerances for cold-finished bars; these are now found in Specification A 108.Footnote * -  According to the primary production sector plan developed reserves of spare parts, spare parts corresponding with the supplier signed a framework agreement, the supplier warehouse to establish a virtual inventory of the spare parts business. According to the urgency of the demand for spare parts, equipment purchase price by a certain percentage of the value of regular payment of negotiated custody, maintenance and testing costs. 

ASME BPVC Section I (1) 2007

 The implementation of such spare parts model, the key is the need for a lead organization unit and a network platform. Area adjacent to the lead unit (for example, can save as a geographical unit) organized a number of power plants, inception of the joint body reserves. Of the host plant and the main auxiliary models, specifications, manufacturing plants and other basic information and the existing reserves of the collection, the statistics of the same model, specifications spare parts, and resource integration, spare parts will be separated each member assigned to reserve units.

ASME BPVC Section I (1) 2007 This section provides requirements for all methods of construction of power, electric, and miniature boilers; high temperature water boilers used in stationary service; and power boilers used in locomotive, portable, and traction service.

 ASME BPVC Section I (1) 2007      Chg: AD      Date: 07/01/09SECTION I - RULES FOR CONSTRUCTIONS OF POWER BOILERSIncludes:1. ASME BPVC-I-AD-2008, 2009   - Amendment Only   Revision / Edition: 07      Chg: AD1+AD2      Date: 07/01/08, 07/01/092. ASME BPVC-I-2007   - Base Document Only   Revision / Edition: 07      Chg:      Date: 00/00/07

Document Abstract

 Rules pertaining to use of the V, A, M, PP, S and E Code symbol stamps are also included. The rules are applicable to boilers in which steam or other vapor is generated at a pressures exceeding 15 psig, and high temperature water boilers intended for operation at pressures exceeding 160 psig and/or temperatures exceeding 250 degree F. Superheaters, economizers, and other pressure parts connected directly to the boiler without intervening valves are considered as part of the scope of Section 1.

Electric Power Industry Association organized "Jiangsu Provincial Power Company supplies electricity industry associations collaborative network" has been carrying out such spare parts management is a useful attempt.